Fluorescent Tubes & Replacements

Fluoro 42LED 15Ø 285mm/300mm 400 Lumen Cool White

Fluorescent LED replacement tube for standard 15Ø 300mm T5 light fittings. The 42 LEDs are located in a single row down the length of the tube. Similar light output to 2 x 20 Watt halogen bulbs. These high quality SMD LED replacement bulbs save power. Energy efficient, they last up to 50 times longer than a standard bulb. The latest SMD chip technology is used that provides the highest light output to consumption ratio available today.

THESE TUBES ARE 285MM FOR THE TUBE, 300MM INC PINS

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro tube in the existing fluoro fitting.  No LED can run through a starter.  This is quite an easy modification, simply take all electronics except the switch out of the circuit (or by pass it), so that the power is runs directly through switch direct to tube holder.  

$30.00

Fluoro 42LED 15Ø 285mm/300mm 380 Lumen Warm White

Fluorescent LED replacement tube for standard 15Ø 300mm T5 light fittings. The 42 LEDs are located in a single row down the length of the tube. Similar light output to 2 x 20 Watt halogen bulbs. These high quality SMD LED replacement bulbs save power. Energy efficient, they last up to 50 times longer than a standard bulb. The latest SMD chip technology is used that provides the highest light output to consumption ratio available today.

THESE TUBES ARE 285mm FOR THE TUBE, 300mm INC PINS

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro tube in the existing fluoro fitting.  No LED can run through a starter.  This is quite an easy modification, simply take all electronics except the switch out of the circuit (or by pass it), so that the power is runs directly through switch direct to tube holder. 

$30.00

D Fluoro Replacement 42LED 130mm 500 Lumen Cool White

 

D type fluorescent LED replacement for standard round and square light fittings. The 42 LEDs are located on the disc that plugs into the existing socket . Similar light output to 2 x 20 Watt halogen bulbs. These high quality SMD LED replacement bulbs save power. Energy efficient, they last up to 50 times longer than a standard bulb. The latest SMD chip technology is used that provides the highest light output to consumption ratio available today.

 

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro tube in the existing fluoro fitting.  No LED can run through a starter.  This is quite an easy modification, simply take all electronics except the switch out of the circuit (or by pass it), so that the power is runs directly through switch direct to tube holder.

$27.95

D Fluoro Replacement 42LED 130mm 380 Lumen Warm White

D type fluorescent LED replacement for standard round and square light fittings. The 42 LEDs are located on the disc that plugs into the existing socket . Similar light output to 2 x 20 Watt halogen bulbs. These high quality SMD LED replacement bulbs save power. Energy efficient, they last up to 50 times longer than a standard bulb. The latest SMD chip technology is used that provides the highest light output to consumption ratio available today.

 

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro tube in the existing fluoro fitting.  No LED can run through a starter.  This is quite an easy modification, simply take all electronics except the switch out of the circuit (or by pass it), so that the power is runs directly through switch direct to tube holder.

$27.95

T8 Fluoro 48LED 450mm 500 Lumen

450mm T8 8 watt tube with rotatable pins so you can spin them 180 degree to have tube off set, designed for early model Winnebago range hoods

The latest SMD chip technology is used that provides the highest light output to consumption ratio available today.

 

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro tube in the existing fluoro fitting.  No LED can run through a starter.  This is quite an easy modification, simply take all electronics except the switch out of the circuit (or by pass it), so that the power is runs directly through switch direct to tube holder. 

$42.00
Syndicate content

energy logos